Standing water after a wash cycle can come from a simple drain-path problem or a failed component.
Start with these safe checks
- Check the drain hose for an obvious kink.
- Look for an error code and write it down.
- Do not force the door open while the drum is full of water.
- Stop use if water is leaking onto the floor.
- Avoid removing powered panels.
What the symptom can mean
Drain pumps, filters, hoses, lid or door sensing, controls and obstructions can all cause a no-drain symptom. The exact cause depends on the model and what the machine does before it stops.
When to arrange repair help
If the symptom continues after safe owner-level checks, or the appliance presents a water, electrical, heat or gas safety concern, stop troubleshooting and arrange professional diagnosis.
What to have ready before calling
Keep the appliance brand, complete model number, any error code, a short timeline of the problem and your location ready. Explain what happens immediately before the failure and whether the symptom is constant or intermittent.
Use model-specific information
Owner manuals and manufacturer support materials take priority over general web guidance. Procedures, error codes and component locations can differ even between appliances from the same brand.
This article provides general information, not a diagnosis for a specific appliance. Follow the manufacturer manual and use qualified help for electrical, gas, sealed-system and internal repairs.